Nose-Tail-7
tail is “capped”
Media Category: Nose and Tail
Nose-Tail-6
Strips run “long” at the tail and cut to shape after all strips installed
Nose-Tail-5a
Strips are glued into the rabbet
Nose-Tail-5
Sculpting a noseblock with a rabbet is more challenging than mitering the nose.
Nose-Tail-4
The first strips are installed “long”
Nose-Tail-3
Stabilize the spar
Nose-Tail-2
Projected shape of the rails provides nose shape layout
Nose-Tail-1
Projecting the rail shape onto the nose. Mark the back of the strip